Skip to content

Mural Installation in Wilton Manors, FL

The short answer

We install printed wallpaper murals in Wilton Manors homes, from measuring and ordering through wall prep and final trimming. The key steps are ordering the right size with extra margin, preparing the wall properly, and hanging panels in sequence so the image lines up across every seam.

A wall mural reads as one continuous image, so small mistakes show. A seam that drifts a quarter inch or a panel hung out of order breaks a skyline, a palm frond or a horizon line, and it is hard to stop seeing. Custom Wallpaper Installer hangs printed wallpaper murals in Wilton Manors homes, about 8 miles south of our base in Pompano Beach. We handle the measuring, wall preparation and panel-by-panel alignment so the finished wall looks like a single picture rather than a stack of strips.

What Mural Installation Involves

Most murals arrive as a set of numbered panels printed from one large image. Unlike patterned wallpaper, there is no repeat to fall back on. Each panel has exactly one correct position, and the image only works if every panel lands where the designer intended.

We start by laying out the panels and checking the numbering and print quality before anything goes on the wall. Then we snap a plumb line, because walls in older and newer homes alike are rarely perfectly square. After that we hang each panel in order, match the image at every seam, smooth out air pockets, and trim cleanly at the ceiling, baseboards, outlets and window casings.

Measuring and Ordering the Right Size

Many mural problems start before installation day, at the ordering stage. If you haven't bought your mural yet, we can measure the wall first so you order a size that fits. Here's what we check:

  • Exact width and height at several points, since ceilings and floors are often not level
  • Extra margin on all sides for trimming, so the important part of the image isn't cut off
  • Where key focal points will fall relative to furniture, headboards, TVs or doorways
  • Outlets, switches, vents and thermostats that will sit in front of the image
  • Which material the mural uses: paste-the-wall, pre-pasted or peel-and-stick

Wall Preparation for Wilton Manors Homes

A mural shows every bump and patch behind it, especially in large areas of a single color like sky or water. Before hanging, we inspect the wall for nail holes, cracks, texture, glossy paint and old adhesive. We fill and sand where needed and apply a primer suited to wallcovering. Primer helps the mural grip, and it also makes future removal easier on the drywall.

Many homes in the area have plaster or drywall over concrete block on exterior walls. Those walls can hold moisture differently than interior partitions, so we check for signs of dampness or past water intrusion. Hanging a mural over a moisture problem leads to lifting seams and staining, so we'll point out anything that should be fixed first.

Humidity, Rainy Season and Scheduling

South Florida has no fully dry season. From May through October the weather is hot, humid and wet, with frequent afternoon thunderstorms, and the cooler months are drier but still warm. Paper and paste react to humidity. Panels can expand slightly, and adhesive dries more slowly in damp air.

For the best result, keep your air conditioning running steadily for a day or two before installation and during drying. Let the mural sit unopened in the room so it adjusts to the indoor conditions. Hurricane season runs from June 1 to November 30. If a storm threatens, power outages and lost air conditioning can affect drying, so we may suggest moving the appointment rather than hanging a mural into an unstable indoor climate.

Good Places for a Mural at Home

Murals work best on an uninterrupted wall where the image has room to breathe. Common choices include the wall behind a bed, a dining room accent wall, a home office backdrop for video calls, a child's room, or the end of a hallway. Bathrooms can work too with the right material and good ventilation, though a shower splash zone is usually not a good fit.

Besides Wilton Manors, we install murals throughout Broward County, including Fort Lauderdale, Oakland Park, Lauderdale-by-the-Sea, Lauderdale Lakes and North Lauderdale.

More services in Wilton Manors

Related

What to expect

How a visit goes

  1. Preparation Comes First

    Most wallpaper problems start with the wall, not the paper. We remove old coverings, repair dents and cracks, smooth textured areas where needed, and prime with a product suited to the wallcovering you've chosen.

  2. Straight Answers About Materials

    Grasscloth, vinyl, murals and peel-and-stick each behave differently in humid rooms, on ceilings and in direct sun. We'll explain the tradeoffs so you can pick a product that fits the space and how you live in it.

  3. Respect for Your Home

    We cover floors, move and protect furniture as needed, and keep the work area organized. At the end of the day, we clean up so your home is livable while the project is underway.

FAQ

Common questions

Don’t see your question? Call (561) 944-3314 and we’ll talk it through.

Can you install a mural I already bought online?

Yes. Have it delivered to your home and leave it unopened in the room where it will hang. We'll check the panels, numbering and size against your wall before we start.

How much extra should I order beyond my wall size?

Most manufacturers recommend a few inches of extra margin on each side for trimming. Check your mural's instructions, or have us measure before you order.

Can a mural go over textured walls?

Heavy texture usually shows through. We generally recommend skimming or smoothing the wall first so the image lies flat and seams stay tight.

Is peel-and-stick easier to get right than traditional paste?

Not always. Peel-and-stick panels are hard to reposition once they grab, and they still need careful alignment. They also need a clean, smooth, properly cured painted surface to stay put.

Does humidity really matter for an indoor mural?

Yes. In our wet season, humid indoor air can slow drying and cause panels to shift slightly. Running your air conditioning steadily before and after installation helps.

Can a mural be removed later?

Many modern murals are designed to strip off more easily, and priming the wall first helps protect the surface underneath. How easily it comes off depends on the product and the wall.

Ready to Plan Your Wallpaper Project?

Tell us about the room, the look you want and any wallpaper you have in mind. We'll talk through wall condition, material options and next steps so you know what to expect before work begins.

(561) 944-3314
Call (561) 944-3314 Request Service