The short answer
Grasscloth can be installed successfully in Deerfield Beach homes when the walls are properly prepped, the rolls are hung in sequence, and the work is timed and handled with the area's humidity in mind. It is best suited to living rooms, bedrooms, dining rooms, and offices rather than bathrooms or kitchens.
Grasscloth brings real texture to a room. Woven grasses, jute, sisal, and other natural fibers give walls a depth that printed paper can't match. That same natural material makes it one of the less forgiving wallcoverings to hang. Custom Wallpaper Installer is based in Pompano Beach, about 3 miles south of Deerfield Beach. We install grasscloth in homes across ZIP codes 33441 and 33442. This page explains what makes grasscloth different, how South Florida's climate affects the job, and what to expect from start to finish.
Why Grasscloth Is Hung Differently Than Standard Wallpaper
Grasscloth is a layer of natural fibers bonded to a paper backing. Because the fibers are plant material, no two rolls look exactly alike. Color and texture shift from strip to strip, and seams usually stay visible. That's part of the look, but careful handling keeps it from looking like a mistake.
The material also reacts badly to paste or water on its face. A drip that would wipe right off vinyl can leave a permanent stain on grasscloth. That's why the installation process is slower and more deliberate.
- Rolls are checked for matching run numbers and shade before anything goes on the wall.
- Strips are hung in the order they come off the roll so color shifts happen gradually.
- Some products call for alternating, or reversing, every other strip to reduce shading differences.
- Paste is applied to the backing only, with clean hands and tools, so the face stays dry.
- Seams are planned so the most noticeable joints fall in corners or less visible spots.
Planning Around Deerfield Beach Humidity and Sun
The Fort Lauderdale area has a tropical climate with no fully dry season. May through October is hot, humid, and wet, with frequent afternoon thunderstorms. November into April is warmer and drier. Natural fibers and paper backings absorb moisture from the air. So indoor conditions on install day matter more for grasscloth than for most wallcoverings.
We ask homeowners to keep the air conditioning running steadily before, during, and after installation. That helps the paper and walls stay stable while the paste cures. For homes closer to the coast, or rooms that get strong afternoon light, we talk through sun exposure. Grasscloth can fade where direct sunlight hits it regularly, so window treatments or a different wall choice may make sense.
The Atlantic hurricane season runs from June 1 to November 30. If your home has had water intrusion or recent repairs, the walls need to be fully dry and sound before grasscloth goes up. Moisture trapped behind it can cause staining and loose seams.
Choosing the Right Rooms in Your Home
Grasscloth works best in dry, lower-traffic spaces where you can enjoy the texture without heavy contact. It's harder to clean than vinyl and usually can't be scrubbed. We'll be honest if a room you have in mind isn't a good fit.
- Good fits: living rooms, dining rooms, bedrooms, home offices, and accent walls behind beds or built-ins.
- Use caution: hallways and entries where hands, bags, and pets brush the walls.
- Usually avoid: full bathrooms, kitchens near the stove or sink, and laundry rooms with high moisture.
What Happens on Installation Day
Most of the work that determines how grasscloth looks happens before the first strip goes up. We start by checking the walls for cracks, old adhesive, gloss paint, and texture. Grasscloth is thin enough that bumps and patches can show through, so we repair and smooth surfaces as needed. We often recommend a liner paper underneath. It gives the grasscloth an even, absorbent base and can make future removal easier.
Next, we lay out the room. We find the best starting point, mark plumb lines, and plan where seams and cuts will land around windows, doors, and outlets. Strips are then pasted, booked, and hung in sequence. Each one is smoothed with tools that won't crush or scuff the fibers. We trim edges cleanly at ceilings and baseboards and reinstall outlet and switch covers.
Before we leave, we walk the room with you, point out how the seams and shading look, and explain how to care for the walls.
Serving Deerfield Beach and Nearby Communities
From our base in Pompano Beach, Deerfield Beach is a short drive. We regularly work in homes throughout ZIP codes 33441 and 33442 in Broward County. We also install grasscloth in Lighthouse Point, Hillsboro Beach, Coconut Creek, Boca Raton, and Margate. If you're comparing materials or still choosing a pattern, we're glad to talk through options before you order rolls.
More services in Deerfield Beach
- Wallpaper Installation in Deerfield Beach
- Wallpaper Removal in Deerfield Beach
- Accent Wall Installation in Deerfield Beach
- Mural Installation in Deerfield Beach
