The short answer
Yes, we install wallpaper murals in Coconut Creek homes, handling wall prep, panel layout and alignment so the image looks seamless. The best results come from accurate measurements before you order, a properly primed wall, and keeping your air conditioning running before and after the install.
A wallpaper mural turns one wall into the focal point of a room, but only if the panels line up and the image reads as one continuous picture. We install printed wallpaper murals in Coconut Creek homes, from nursery accent walls and home offices to living room feature walls and dining areas. Our crew comes from Pompano Beach, about 5 miles east, so getting to homes in the 33066 and 33073 ZIP codes is simple. This page covers what a mural installation involves, how to plan one, and how South Florida's humidity affects the work.
How Mural Installation Differs From Regular Wallpaper
Standard patterned wallpaper repeats, so small shifts at a seam are hard to spot. A mural is one large image split into numbered panels, and every panel has a single correct position. If the first panel is set slightly off level, the error grows across the wall and shows up as a crooked horizon or a broken line in the artwork.
Because of that, we spend more time on layout than on hanging. We lay out the panels in order, check them against the printed panel map, and mark a plumb starting line before any paste goes on the wall. We also decide where to center the key part of the image, such as a tree trunk, skyline or focal point, so it isn't hidden behind a headboard, sofa or TV.
Planning Your Mural Before You Order
Most mural problems start before the installer arrives. Printed murals are sized to your wall, so measurements need to be right, and the file should include extra image around the edges for trimming. Ceilings and corners are rarely perfectly square, and that extra margin is what lets us trim cleanly without losing part of the picture.
We're glad to measure the wall and talk through the order with you before you buy. Things worth thinking about:
- Measure the full width and height, plus outlets, switches, windows and doors on that wall.
- Order a few inches of extra image on every side for trimming.
- Ask the manufacturer whether the mural is pasted, unpasted or peel-and-stick, since installation differs for each.
- Consider where furniture will sit so the main subject of the image stays visible.
- Keep the panels in their packaging until install day, stored flat in a cool, dry room.
Humidity, Weather and Timing in Coconut Creek
The Fort Lauderdale area has a tropical climate with no fully dry season. From May through October it is hot, humid and wet, with frequent afternoon thunderstorms, while November into April is warmer and drier. Moisture in the air affects how paste cures and how paper expands, which matters more on a mural than on almost any other wallcovering, because panels have to meet precisely.
We can install year-round, but we plan around the conditions. We ask homeowners to keep the air conditioning running steadily for a day or two before and after installation, so the room stays at a consistent temperature and humidity while the paste dries. If you're scheduling during the Atlantic hurricane season, which runs from June 1 to November 30, it's sensible to leave some flexibility in case a storm affects travel or power.
Getting the Wall Ready
A mural shows every flaw underneath it. Bumps, nail pops, patched drywall and heavy texture can telegraph through thin printed material, especially with light backgrounds or glossy finishes. Before hanging, we inspect the wall, fill and sand imperfections, and apply a primer suited to wallcovering so the paste grips well now and the mural can come down later without tearing up the drywall.
If your wall has a heavy texture, we'll talk through options, such as skim-coating the surface smooth or choosing a thicker mural material that hides more. We'll also note any signs of moisture, like staining near windows or exterior walls, since a damp wall should be dealt with before anything goes over it.
What to Expect on Installation Day
Most single-wall murals can be completed in one visit, though prep work like skim-coating may add time. Here's the general sequence:
- Move furniture and protect floors near the wall.
- Remove outlet and switch covers.
- Check panels against the panel map and confirm the image layout with you.
- Set a plumb starting line and hang panels in order, matching each seam.
- Trim edges at the ceiling, baseboard and corners, and cut around openings.
- Wipe off excess paste, reinstall covers and clean up.
Serving Coconut Creek and Nearby Communities
Coconut Creek is in Broward County, a short drive from our Pompano Beach base. We also install murals and wallpaper for homeowners in Margate, Deerfield Beach, North Lauderdale, Lighthouse Point and Hillsboro Beach. If you're planning a feature wall and want help confirming measurements or choosing the right wall, reach out and we'll talk it through.
More services in Coconut Creek
- Wallpaper Installation in Coconut Creek
- Wallpaper Removal in Coconut Creek
- Accent Wall Installation in Coconut Creek
- Grasscloth Wallpaper Installation in Coconut Creek
